How To Fix A Dryer That Won’t Shut Off

Having a household appliance that isn’t working can be a frustrating experience. This problem becomes even more challenging if it is a residential appliance that you use almost every day. If you have a dryer that does not shut off, you don’t have to worry. Several dryer technicians are always ready to help you. All you have to do give a dryer repair technician a call, and they will repair the machine in no time. However, if you want to fix the problem yourself, then this article can help you. Fixing a dryer that does not shut off is not very difficult. However, you could face some problem in identifying the dryer part that is causing the problem.

We have created a detailed list of parts that can prevent the dryer from shutting off. You can use the list to find out the exact cause of the problem and the steps you must take to troubleshoot it.

technician repairing a dryerDoor Switch

It is a safety feature that commonly found in most modern dryers. The door switch is a simple on and off switch that prevents the drum from turning when the machine door is open. If the drum rotates when the machine door is open, it indicates that the door switch may be defective. In most devices, the switch is behind the machine’s front panel. The switch button will typically protrude into the door opening. If you suspect the switch to be the culprit, you can check its condition using a multi-meter. The switch may have 2 or more terminals, so make sure you check all the terminals for continuity. These terminals must be checked only after you have unplugged the dryer.

Timer

The timer is a part of the control console of the machine. It consists of a small motor that connected to several cams and gears which control the electrical contacts of the timer. These contacts control the heat circuits and motor of the machine. When the timer motor or the timer contacts are defective, it can prevent the timer from functioning normally. If there is a problem with the timer, you have to replace it immediately. You can check the condition of the contacts and the motor using a multi-meter. Conduct the test after disconnecting the power supply to the dryer.

Cycling Thermostat

Most new dryers come with an “Auto Dry” cycle, which regulates the temperature of the drum and advances the timer. The primary function of the cycling thermostat is to turn off the heat source when the desired temperature is reached. To check the condition of the thermostat, you must check the power to the machine timer using a multi-meter, during the drying cycle. Since this is a live voltage test, it must be performed by qualified dryer repairman. You can always find a dryer service technician who will visit your house at your convenience to repair your home appliance.

Cool Down Thermostat

Some dryers use the cool-down thermostat at the end of the drying cycle to tumble your clothes without heat. This part sends power to the drive motor to keep the motor running until a reaching particular temperature inside the drum. If the cool-down thermostat is defective, it will cause the drum to rotate endlessly or until the machine door opens. Use a multimeter to check the continuity of the thermostat. Remember to conduct this test must after the power is removed from the appliance.

More Broward County Locations We Service:

Pembroke Pines Appliance Repair, Tamarac, Davie, North Lauderdale, Weston,  Pompano Beach, Clothes Dryer Service Company Lauderhill, Lauderdale Lakes, Lighthouse Point, Hollywood Appliance Repair Service, Deerfield Beach In Home Appliance Service, Sunrise, Margate, Dania, Cooper City Laundry Dryer Repair, Dryer Repair Technician Plantation, Dryer Repair Fort Lauderdale, Miramar, Appliance Repair in Coral Springs FL, Hallandale, Parkland, Dryer Repairman Oakland Park

 

How To Fix A Gas Range or Stove Igniter That Won't Light
Why Is My Washing Machine Not Heating Up The Water?
Touch to Call!