Kenmore Washer Not Filling with Water — Water Valve & Inlet Hose Replacement
Verified Repair Report™ #0037
A washing machine that won't fill with water can't complete the wash cycle, leaving homeowners with dirty laundry and unnecessary frustration.
In this Verified Repair Report™, our technician serviced a Kenmore top-load washer in Tamarac, Florida after the customer reported a water fill problem. Following a complete diagnosis, the faulty water inlet valve was replaced along with the inlet hose, restoring normal operation.
🟢 Successfully Repaired
Service Overview
| Brand: | Kenmore (Whirlpool Manufactured) |
| Appliance: | Top-Load Washer |
| Model: | 110.28103310 |
| Problem Reported: | Not Filling Properly |
| Diagnosis: | Failed Water Inlet Valve |
| Repair Performed: | Replaced Water Valve & Inlet Hose |
| Outcome: | Successfully Repaired |
| Repair Complexity: | Basic |
| Technician: | Tristan |
| Location: | Tamarac, FL 33321 |
| Repair Report #: | 0037 |
Customer Complaint
The homeowner reported that the washer was not filling properly with water, preventing normal wash cycles from completing.
Because water supply issues can be caused by several different components, a complete diagnostic inspection was performed before recommending any repairs.
Technician Inspection
After inspecting the washer, our technician confirmed that the water supply to the home was functioning properly.
Testing determined the washer's water inlet valve had failed and was no longer regulating water flow correctly.
As part of the repair, the water inlet hose was also replaced to help ensure reliable operation.
Diagnosis: Failed Water Inlet Valve
The water inlet valve controls the flow of hot and cold water into the washing machine.
When the valve begins to fail, homeowners may notice:
✔ Washer won't fill
✔ Slow filling
✔ Inconsistent water levels
✔ Wash cycles stopping early
Replacing the defective valve restored normal water flow and allowed the washer to operate correctly.
Repair Performed
🟢 Successful Repair Completed
✅ Diagnosed washer not filling properly
✅ Tested water supply
✅ Confirmed failed water inlet valve
✅ Replaced water inlet valve
✅ Installed new water inlet hose
✅ Tested washer operation
✅ Verified proper water flow
Repair Results
Following the repair:
✅ Washer filled normally
✅ Proper water flow restored
✅ Wash cycles operated correctly
✅ Customer avoided replacing the washer
Why This Repair Matters
Many homeowners assume a washer that won't fill needs a major repair or replacement.
In many cases, the problem is isolated to the water inlet valve, a repair that can restore normal operation without replacing the entire appliance.
Accurate diagnosis helps homeowners avoid unnecessary expenses while extending the life of their washer.
⭐ Verified Customer Feedback
⭐⭐⭐⭐⭐ Verified 5-Star Google Rating
We appreciate every customer who takes the time to leave feedback after their service appointment.
Homeowner Tips
If your washer isn't filling properly:
- Verify both water supply valves are fully open.
- Check for kinked or damaged water supply hoses.
- Replace aging inlet hoses every few years as preventative maintenance.
- If the washer still won't fill, have the water inlet valve professionally diagnosed before replacing other components.
Preventative Maintenance
To help extend the life of your washer:
✅ Inspect water supply hoses regularly for signs of wear.
✅ Replace deteriorating hoses before leaks develop.
✅ Turn the water supply off if the washer will be unused for an extended period.
✅ Schedule repairs promptly if you notice slow filling or inconsistent water levels.
Machine Information
Brand: Kenmore (Whirlpool Manufactured)
Appliance: Top-Load Washer
Model: 110.28103310
Repair Report: 0037
Repair Status: ✔ Service Completed Successfully
Location: 📍 Tamarac, Florida 33321
Repair Classification
🟢 Repair Completed Successfully
Reliability Index Entry
| Brand | Appliance | Failure | Root Cause | Repairable |
|---|---|---|---|---|
| Kenmore | Top-Load Washer | Water Inlet Valve | Component Failure | Yes |
Frequently Asked Questions
1. Why isn't my Kenmore washer filling with water?
Common causes include a failed water inlet valve, clogged inlet screens, low water pressure, or electrical control issues.
2. What does a water inlet valve do?
The water inlet valve opens and closes to allow the correct amount of hot and cold water into the washer during each cycle.
3. Can a bad water inlet valve be repaired?
Most water inlet valves are replaced rather than repaired when they fail.
4. Should I replace my washer if it won't fill?
Not necessarily. A failed water inlet valve is often a straightforward repair that can restore normal operation.
5. How often should washer inlet hoses be replaced?
Most manufacturers recommend inspecting hoses regularly and replacing them if they show signs of cracking, bulging, or wear.
Continue Exploring
Related Repair Reports:
Electrolux Washer Water Valve Replacement (RR0033)
LG Washer Door Latch Replacement (RR0015)
Front-Load Washer Constantly Draining & Control Panel Wouldn't Turn On (RR0036)
Washer Not Filling With Water?
If your washer is filling slowly, not filling at all, or stopping before the wash cycle begins, The Appliance Experts can accurately diagnose the problem and recommend the most cost-effective repair. We proudly provide professional appliance repair services throughout Tamarac and South Florida.
Need Washer Repair?
If your appliance is having a similar problem, The Appliance Experts can help diagnose the issue and explain your repair options.
📞 (954) 256-1622 Call or Text★★★★★ Trusted by South Florida Homeowners.
✔ Honest Recommendations
✔ Experienced Technicians
✔ Detailed Repair Reports
Serving Broward, Miami-Dade & Palm Beach County
The Appliance Experts
Trusted appliance repair professionals serving homeowners throughout South Florida with expert repairs, genuine replacement parts, and detailed Repair Reports™.
REPAIR REPORTS
Refrigerator Repair Reports
Washer Repair Reports
Dryer Repair Reports
Dishwasher Repair Reports
Oven & Range Repair Reports
COMMON PROBLEMS
Repair Reports™ are based on actual technician service calls performed by The Appliance Experts. Individual appliance failures and repair recommendations may vary.
© 2026 The Appliance Experts. All Rights Reserved.
Privacy Policy | Terms of Service | Contact Us